dmesg - HITACHI HTS72323

Return To HITACHI HTS72323 System Information

CPU0 microcode updated early to revision 0x7, date = 2013-08-20
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-15-generic (buildd@komainu) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015 (Ubuntu 3.19.0-15.15-generic 3.19.3)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c3a7bfff] usable
BIOS-e820: [mem 0x00000000c3a7c000-0x00000000c3a81fff] reserved
BIOS-e820: [mem 0x00000000c3a82000-0x00000000c3b47fff] usable
BIOS-e820: [mem 0x00000000c3b48000-0x00000000c3b5afff] reserved
BIOS-e820: [mem 0x00000000c3b5b000-0x00000000c3bdbfff] ACPI NVS
BIOS-e820: [mem 0x00000000c3bdc000-0x00000000c3c0efff] reserved
BIOS-e820: [mem 0x00000000c3c0f000-0x00000000c3c5cfff] usable
BIOS-e820: [mem 0x00000000c3c5d000-0x00000000c3e67fff] reserved
BIOS-e820: [mem 0x00000000c3e68000-0x00000000c3ee7fff] ACPI NVS
BIOS-e820: [mem 0x00000000c3ee8000-0x00000000c3f0efff] reserved
BIOS-e820: [mem 0x00000000c3f0f000-0x00000000c3f17fff] usable
BIOS-e820: [mem 0x00000000c3f18000-0x00000000c3f1efff] reserved
BIOS-e820: [mem 0x00000000c3f1f000-0x00000000c3f6bfff] usable
BIOS-e820: [mem 0x00000000c3f6c000-0x00000000c3f79fff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f7a000-0x00000000c3f7cfff] ACPI data
BIOS-e820: [mem 0x00000000c3f7d000-0x00000000c3f80fff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f81000-0x00000000c3f81fff] ACPI data
BIOS-e820: [mem 0x00000000c3f82000-0x00000000c3f8afff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f8b000-0x00000000c3f8bfff] ACPI data
BIOS-e820: [mem 0x00000000c3f8c000-0x00000000c3f9efff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f9f000-0x00000000c3ffefff] ACPI data
BIOS-e820: [mem 0x00000000c3fff000-0x00000000c3ffffff] usable
BIOS-e820: [mem 0x00000000c4000000-0x00000000c5ffffff] reserved
BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 4391A88/4391A88, BIOS 6NET84WW (1.45 ) 10/03/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 disabled
  1 base 000000000 mask F80000000 write-back
  2 base 080000000 mask FC0000000 write-back
  3 base 0C0000000 mask FF8000000 write-back
  4 base 100000000 mask FE0000000 write-back
  5 base 120000000 mask FF0000000 write-back
  6 base 130000000 mask FF8000000 write-back
  7 base 0C4000000 mask FFE000000 uncachable
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
original variable MTRRs
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2GB, range: 1GB, type WB
reg 3, base: 3GB, range: 128MB, type WB
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
reg 6, base: 4864MB, range: 128MB, type WB
reg 7, base: 3136MB, range: 32MB, type UC
total RAM covered: 4064M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 64MB, type WB
reg 3, base: 3168MB, range: 32MB, type WB
reg 4, base: 4GB, range: 1GB, type WB
reg 5, base: 4992MB, range: 128MB, type UC
e820: update [mem 0xc4000000-0xc5ffffff] usable ==> reserved
e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc4000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f68a0-0x000f68af] mapped at [ffff8800000f68a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x137e00000-0x137ffffff]
 [mem 0x137e00000-0x137ffffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x137dfffff]
 [mem 0x120000000-0x137dfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc3a7bfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xc39fffff] page 2M
 [mem 0xc3a00000-0xc3a7bfff] page 4k
init_memory_mapping: [mem 0xc3a82000-0xc3b47fff]
 [mem 0xc3a82000-0xc3b47fff] page 4k
init_memory_mapping: [mem 0xc3c0f000-0xc3c5cfff]
 [mem 0xc3c0f000-0xc3c5cfff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
init_memory_mapping: [mem 0xc3f0f000-0xc3f17fff]
 [mem 0xc3f0f000-0xc3f17fff] page 4k
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0xc3f1f000-0xc3f6bfff]
 [mem 0xc3f1f000-0xc3f6bfff] page 4k
init_memory_mapping: [mem 0xc3fff000-0xc3ffffff]
 [mem 0xc3fff000-0xc3ffffff] page 4k
RAMDISK: [mem 0x346e8000-0x3636bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6870 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000C3FF18B8 00009C (v01 LENOVO TP-6N    00001450  LTP 00000000)
ACPI: FACP 0x00000000C3FF1A00 0000F4 (v04 LENOVO TP-6N    00001450 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20141107/tbfadt-618)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20141107/tbfadt-699)
ACPI: DSDT 0x00000000C3FF1C9B 00CEAE (v01 LENOVO TP-6N    00001450 MSFT 03000001)
ACPI: FACS 0x00000000C3EE7000 000040
ACPI: SSDT 0x00000000C3FF1BB4 0000E7 (v01 LENOVO TP-6N    00001450 MSFT 03000001)
ACPI: ECDT 0x00000000C3FFEB49 000052 (v01 LENOVO TP-6N    00001450 LNVO 00000001)
ACPI: APIC 0x00000000C3FFEB9B 0000BC (v01 LENOVO TP-6N    00001450 LNVO 00000001)
ACPI: MCFG 0x00000000C3FFEC57 00003C (v01 LENOVO TP-6N    00001450 LNVO 00000001)
ACPI: HPET 0x00000000C3FFEC93 000038 (v01 LENOVO TP-6N    00001450 LNVO 00000001)
ACPI: ASF! 0x00000000C3FFEDBE 0000A4 (v16 LENOVO TP-6N    00001450 PTL  00000001)
ACPI: SLIC 0x00000000C3FFEE62 000176 (v01 LENOVO TP-6N    00001450  LTP 00000000)
ACPI: BOOT 0x00000000C3FFEFD8 000028 (v01 LENOVO TP-6N    00001450  LTP 00000001)
ACPI: SSDT 0x00000000C3EE591A 00084B (v01 LENOVO TP-6N    00001450 INTL 20050513)
ACPI: TCPA 0x00000000C3F8B000 000032 (v02 PTL     CRESTLN 06040000      00005A52)
ACPI: DMAR 0x00000000C3F81000 000068 (v01 INTEL  CP_FIELD 00000001 INTL 00000001)
ACPI: SSDT 0x00000000C3F7C000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20060912)
ACPI: SSDT 0x00000000C3F7B000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20060912)
ACPI: SSDT 0x00000000C3F7A000 00049F (v01 PmRef  ApTst    00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
NODE_DATA(0) allocated [mem 0x137ff7000-0x137ffbfff]
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133600000-ffff8801375fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x137ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xc3a7bfff]
  node   0: [mem 0xc3a82000-0xc3b47fff]
  node   0: [mem 0xc3c0f000-0xc3c5cfff]
  node   0: [mem 0xc3f0f000-0xc3f17fff]
  node   0: [mem 0xc3f1f000-0xc3f6bfff]
  node   0: [mem 0xc3fff000-0xc3ffffff]
  node   0: [mem 0x100000000-0x137ffffff]
Initmem setup node 0 [mem 0x00001000-0x137ffffff]
On node 0 totalpages: 1031044
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 12464 pages used for memmap
  DMA32 zone: 797671 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 229376 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
PM: Registered nosave memory: [mem 0xc3a7c000-0xc3a81fff]
PM: Registered nosave memory: [mem 0xc3b48000-0xc3b5afff]
PM: Registered nosave memory: [mem 0xc3b5b000-0xc3bdbfff]
PM: Registered nosave memory: [mem 0xc3bdc000-0xc3c0efff]
PM: Registered nosave memory: [mem 0xc3c5d000-0xc3e67fff]
PM: Registered nosave memory: [mem 0xc3e68000-0xc3ee7fff]
PM: Registered nosave memory: [mem 0xc3ee8000-0xc3f0efff]
PM: Registered nosave memory: [mem 0xc3f18000-0xc3f1efff]
PM: Registered nosave memory: [mem 0xc3f6c000-0xc3f79fff]
PM: Registered nosave memory: [mem 0xc3f7a000-0xc3f7cfff]
PM: Registered nosave memory: [mem 0xc3f7d000-0xc3f80fff]
PM: Registered nosave memory: [mem 0xc3f81000-0xc3f81fff]
PM: Registered nosave memory: [mem 0xc3f82000-0xc3f8afff]
PM: Registered nosave memory: [mem 0xc3f8b000-0xc3f8bfff]
PM: Registered nosave memory: [mem 0xc3f8c000-0xc3f9efff]
PM: Registered nosave memory: [mem 0xc3f9f000-0xc3ffefff]
PM: Registered nosave memory: [mem 0xc4000000-0xc5ffffff]
PM: Registered nosave memory: [mem 0xc6000000-0xc77fffff]
PM: Registered nosave memory: [mem 0xc7800000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc8000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880137c00000 s87040 r8192 d31744 u262144
pcpu-alloc: s87040 r8192 d31744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1014911
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3945720K/4124176K available (7993K kernel code, 1232K rwdata, 3752K rodata, 1408K init, 1300K bss, 178456K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1728.986 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.97 BogoMIPS (lpj=6915944)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30078 entries in 118 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
dmar: RMRR base: 0x000000c3ee9000 end: 0x000000c3efffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU       Q 820  @ 1.73GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2
CPU2 microcode updated early to revision 0x7, date = 2013-08-20
 #3
 #4
CPU4 microcode updated early to revision 0x7, date = 2013-08-20
 #5
 #6
CPU6 microcode updated early to revision 0x7, date = 2013-08-20
 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (27663.77 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xc3b5b000-0xc3bdbfff] (528384 bytes)
PM: Registering ACPI NVS region [mem 0xc3e68000-0xc3ee7fff] (524288 bytes)
PM: Registering ACPI NVS region [mem 0xc3f6c000-0xc3f79fff] (57344 bytes)
PM: Registering ACPI NVS region [mem 0xc3f7d000-0xc3f80fff] (16384 bytes)
PM: Registering ACPI NVS region [mem 0xc3f82000-0xc3f8afff] (36864 bytes)
PM: Registering ACPI NVS region [mem 0xc3f8c000-0xc3f9efff] (77824 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:35:40, date: 08/03/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801321B0800 000343 (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801325F0800 0006B2 (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801321B1000 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801321AC000 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xfebfffff]
pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf2627800-0xf262780f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io  0x1800-0x1807]
pci 0000:00:16.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
pci 0000:00:19.0: reg 0x18: [io  0x1820-0x183f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf2628000-0xf26283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf2628400-0xf26287ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x1818-0x181f]
pci 0000:00:1f.2: reg 0x14: [io  0x180c-0x180f]
pci 0000:00:1f.2: reg 0x18: [io  0x1810-0x1817]
pci 0000:00:1f.2: reg 0x1c: [io  0x1808-0x180b]
pci 0000:00:1f.2: reg 0x20: [io  0x1840-0x185f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf2627000-0xf26277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2628800-0xf26288ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x1860-0x187f]
pci 0000:01:00.0: [10de:0a3c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:03.0:   bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:03.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:4239] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf20fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf2700000-0xf27fffff 64bit pref]
pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:0d:00.0: reg 0x10: [mem 0xf2100000-0xf21000ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
pci 0000:0d:00.1: reg 0x10: [mem 0xf2100400-0xf21004ff]
pci 0000:0d:00.1: supports D1 D2
pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 0x10: [mem 0xf2200000-0xf2201fff 64bit]
pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
pci 0000:00:1c.6:   bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:17:00.0: [1180:e822] type 00 class 0x080500
pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:17:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
pci 0000:17:00.0: supports D1 D2
pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:17:00.3: [1180:e832] type 00 class 0x0c0010
pci 0000:17:00.3: reg 0x10: [mem 0xf2300800-0xf2300fff]
pci 0000:17:00.3: supports D1 D2
pci 0000:17:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
pci 0000:00:1c.7:   bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc8000000-0xfebfffff] (subtractive decode)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc3a7c000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3b48000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3c5d000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3f18000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3f6c000-0xc3ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xc7ffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0x1000-0x107f] could not be reserved
system 00:01: [io  0x1180-0x11ff] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x15e0-0x15ef] has been reserved
system 00:01: [io  0x1600-0x1641] has been reserved
system 00:01: [io  0x1644-0x167f] could not be reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xf2626000-0xf2626fff] has been reserved
system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:03.0:   bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:03.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf2700000-0xf27fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
pci 0000:00:1c.6:   bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
pci 0000:00:1c.7:   bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:00:1e.0: PCI bridge to [bus 1f]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0xc8000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2700000-0xf27fffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
pci_bus 0000:0f: resource 1 [mem 0xf2200000-0xf22fffff]
pci_bus 0000:17: resource 1 [mem 0xf2300000-0xf23fffff]
pci_bus 0000:1f: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:1f: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:1f: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:1f: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:1f: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:1f: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:1f: resource 10 [mem 0xc8000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29200K (ffff8800346e8000 - ffff88003636c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbfa7c000-0xc3a7c000] (64MB) mapped at [ffff8800bfa7c000-ffff8800c3a7bfff]
Simple Boot Flag at 0x35 set to 0x1
microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x7
microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x7
microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x7
microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x7
microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x7
microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x7
microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x7
microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1438612541.348:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (49 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
0000:00:16.3: ttyS4 at I/O 0x1800 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
usb usb1: SerialNumber: 0000:0f:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
usb usb2: SerialNumber: 0000:0f:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2628000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2628400
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 9e64807092f3a6a8f66f3b7ea4cb3767fdfae08a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:05: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 11:749:585
acpi LNXIOBAY:00: hash matches
rtc_cmos 00:02: setting system clock to 2015-08-03 14:35:42 UTC (1438612542)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 188K (ffff8800017d1000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
random: systemd-udevd urandom read with 20 bits of entropy available
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
acpi device:03: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
PTP clock support registered
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:0d:00.0: No vmmc regulator found
sdhci-pci 0000:0d:00.0: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
sdhci-pci 0000:17:00.0: SDHCI controller found [1180:e822] (rev 1)
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:17:00.0: No vmmc regulator found
sdhci-pci 0000:17:00.0: No vqmmc regulator found
mmc1: SDHCI controller on PCI [0000:17:00.0] using DMA
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627100 irq 37
ata2: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627180 irq 37
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627300 irq 37
ata6: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627380 irq 37
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
firewire_ohci 0000:17:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:00:30:f3
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
usb 3-1: New USB device found, idVendor=8087, idProduct=0020
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0020
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70B, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72323 B70B PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1.4: new full-speed USB device number 3 using ehci-pci
firewire_core 0000:17:00.3: created device fw0: GUID f0def1ff0030f3ff, S400
usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: Broadcom Bluetooth Device
usb 3-1.4: Manufacturer: Broadcom Corp
usb 3-1.4: SerialNumber: 78DD08ACCDA6
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ATAPI: HL-DT-ST DVDRAM GU40N, QX20, max UDMA/133
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU40N     QX20 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
tsc: Refined TSC clocksource calibration: 1728.998 MHz
psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 0, fw id: 578367
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Nameserver information manager.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
usbcore: registered new interface driver btusb
[drm] Initialized drm 1.1.0 20060810
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
Non-volatile memory driver v1.3
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: 
thinkpad_acpi: ThinkPad BIOS 6NET84WW (1.45 ), EC 6MHT46WW-1.21
thinkpad_acpi: Lenovo ThinkPad W510, model 4391A88
thinkpad_acpi: detected a 16-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or  required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.76  Thu Jan 22 12:11:08 PST 2015
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
sound hdaudioC0D0: CX20585: BIOS auto-probing.
sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Internal Mic=0x23
sound hdaudioC0D0:      Mic=0x1b
sound hdaudioC0D0:      Dock Mic=0x1a
sound hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[326]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1438612560.610:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.610:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.670:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.670:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.670:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.670:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.762:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.762:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.762:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612560.762:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=637 comm="apparmor_parser"
audit_printk_skb: 21 callbacks suppressed
audit: type=1400 audit(1438612565.934:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612566.034:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612566.034:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612566.034:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1438612566.034:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=637 comm="apparmor_parser"
Adding 4123132k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:4123132k FS
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
wlan0: authenticate with 9c:1c:12:2e:aa:42
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 1/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 2/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 3/3)
wlan0: authentication with 9c:1c:12:2e:aa:42 timed out
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 9c:1c:12:2e:aa:42
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 1/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 2/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 3/3)
wlan0: authentication with 9c:1c:12:2e:aa:42 timed out
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=4)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: authenticate with 9c:1c:12:2e:aa:42
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 2/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 3/3)
wlan0: authentication with 9c:1c:12:2e:aa:42 timed out
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: authenticate with 9c:1c:12:2e:aa:42
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 2/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 3/3)
wlan0: authentication with 9c:1c:12:2e:aa:42 timed out
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
perf interrupt took too long (2537 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: authenticate with 9c:1c:12:2e:aa:42
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 2/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 3/3)
wlan0: authentication with 9c:1c:12:2e:aa:42 timed out
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: authenticate with 9c:1c:12:2e:aa:42
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 2/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 3/3)
wlan0: authentication with 9c:1c:12:2e:aa:42 timed out
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 9c:1c:12:2e:aa:42
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 1/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 2/3)
wlan0: direct probe to 9c:1c:12:2e:aa:42 (try 3/3)
wlan0: authentication with 9c:1c:12:2e:aa:42 timed out
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 9c:1c:12:2e:aa:52
wlan0: send auth to 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:1c:12:2e:aa:52 (try 1/3)
wlan0: RX AssocResp from 9c:1c:12:2e:aa:52 (capab=0x411 status=0 aid=1)
wlan0: associated

Return To HITACHI HTS72323 System Information